Design and Optimization of Underwater Glider Shape
-
摘要: 借助流体动力计算软件CFX和Matlab,对水下滑翔机器人载体外形进行设计和优化.通过对4种载体方案的分析计算和运动仿真,最终得到了一种比较合理的外形方案.研究结果表明,采用CFX流体动力计算软件对于研究水下机器人载体的外形结构,尤其是在方案设计阶段在外形流体动力设计中具有重要的作用,可缩短研制周期、降低设计成本.Abstract: We have a preliminary discussion on the configuration optimization of a new kind of underwater vehicle-Underwater Glider.After studying the shape optimization of the glider,we get an optimized shape design by means of the union simulation of CFX and Matlab.The results show that the union simulation has achieved some good effect,and it has a practical significance for reducing the period and cost of model experiments as well as for studying the underwater vehicle's hydrodynamic design,especially for design in scheme design phase.
-
Keywords:
- underwater glider /
- underwater vehicle /
- shape optimization /
- CFX /
- Matlab
-
-
[1] 蒋新松,封锡盛,等. 水下机器人[M]. 沈阳:辽宁科学技术出版社,2000. [2] 陈厚泰.潜艇操纵性[M].北京:国防工业出版社,1981. [3] 施生达.潜艇操纵性[M].北京:国防工业出版社,1995. [4] 孙元泉,马运义,邓志纯,等.潜艇和深潜器的现代操纵理论与应用[M].北京:国防工业出版社,2001. [5] 邵世明,赵连恩,朱念昌. 船舶阻力[M].北京:国防工业出版社,1992. [6] 徐燕侯,过明道,徐立功,等.流体动力学[M].北京:科学出版社,2002. [7] 张宇文.鱼雷总体设计原理与方法[M].西安:西北工业大学出版社,1998. [8] 燕奎臣,等. 深海作业型自治水下机器人总体方案设计报告(载体分系统设计分册)[R]. 沈阳:中科院沈阳自动化研究所科技报告,2003. [9] 袁学庆,等.自治水下机器人阻力的数值模拟与试验研究[R]. 沈阳:中科院沈阳自动化研究所,2003.
计量
- 文章访问数: 57
- HTML全文浏览量: 1323
- PDF下载量: 1076