陈钢, 王蕾, 贾庆轩, 孙汉旭, 王仕卫. 基于MCPC模型的机器宇航员运动学参数标定方法与实验[J]. 机器人, 2017, 39(2): 151-159.DOI: 10.13973/j.cnki.robot.2017.0151.
CHEN Gang, WANG Lei, JIA Qingxuan, SUN Hanxu, WANG Shiwei. Calibration Method and Experiments of Kinematic Parameters for Robonaut Based on MCPC Model. ROBOT, 2017, 39(2): 151-159. DOI: 10.13973/j.cnki.robot.2017.0151.
Abstract:A robonaut kinematic calibration method based on MCPC (modified complete and parametrically continuous) model is proposed. On the basis of the analysis on the robonaut joint and link flexibility, a composite error model considering both geometric error and flexibility error is established using the MCPC method. And then, a robonaut kinematic parameter calibration method is proposed. Experimental results show that the proposed calibration method can eliminate the influence of flexible factors on kinematic parameter calibration and obtain accurate kinematic parameters, and can effectively improve the operation precision of robonaut.
[1] 陈钢,贾庆轩,李彤,等.基于误差模型的机器人运动学参数标定方法与实验[J].机器人,2012,34(6):680-688.Chen G, Jia Q X, Li T, et al. Calibration method and experiments of robot kinematics parameters based on error model[J]. Robot, 2012, 34(6):680-688.
[2] 刘志,赵正大,谢颖,等.考虑结构变形的机器人运动学标定及补偿[J].机器人,2015,37(3):376-384.Liu Z, Zhao Z D, Xie Y, et al. Kinematic calibration and compensation for a robot with structural deformation[J]. Robot, 2015, 37(3):376-384.
[3] Messay T, Ordóñez R, Marcil E. Computationally efficient and robust kinematic calibration methodologies and their application to industrial robots[J]. Robotics and Computer-Integrated Manufacturing, 2016, 37:33-48.
[4] 白云飞,丛明,杨小磊,等.基于6参数模型的6R串联机器人运动学参数辨识[J].机器人,2015,37(4):486-492.Bai Y F, Cong M, Yang X L, et al. Kinematic parameter identification for 6R serial robots based on a 6-parameter model[J]. Robot, 2015, 37(4):486-492.
[5] Bonitz R G, Hsia T C. Calibrating a multi-manipulator robotic system[J]. IEEE Robotics & Automation Magazine, 1997, 4(1):18-22.
[6] 李文广.双机器人标定方法研究及协调仿真[D].沈阳:沈阳理工大学,2011.Li W G. Research of dual-robot calibration approaches and cooperative simulation[D]. Shenyang:Shenyang Ligong University, 2011.
[7] Khalil W, Besnard S. Geometric calibration of robots with flexible joints and links[J]. Journal of Intelligent and Robotic Systems, 2002, 34(4):357-379.
[8] Meggiolaro M A, Dubowsky S, Mavroidis C. Geometric and elastic error calibration of a high accuracy patient positioning system[J]. Mechanism and Machine Theory, 2005, 40(4):415-427.
[9] Zhou J, Nguyen H N, Kang H J. Simultaneous identification of joint compliance and kinematic parameters of industrial robots[J]. International Journal of Precision Engineering and Manufacturing, 2014, 15(11):2257-2264.
[10] Zhuang H Q, Wang L K, Roth Z S. Error-model-based robot calibration using a modified CPC model[J]. Robotics and Computer-Integrated Manufacturing, 1993, 10(4):287-299.
[11] Lightcap C, Hamner S, Schmitz T, et al. Improved positioning accuracy of the PA10-6CE robot with geometric and flexibility calibration[J]. IEEE Transactions on Robotics, 2008, 24(2):452-456.