Wiring Principle of Anti-high-frequency Interference in Remote Pipe Welding Robot
LIU Li-jun1,2, FU Ji-lian2, WU Lin1
1. National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin1 50001, China; 2. School of Material Science and Engineering, Harbin University of Science and Technology, Harbin 150080, China
Abstract:This paper presents some disposal measures based on different grade circuits such as disturbing circuit,common circuit and sensitive circuit,and analyzes the wiring principle on anti-high-frequency interference of system general wires,signal wires and shielding twisted-pair(STP) wires in remote pipe welding robot,which includes: enlarging the distance,intercrossing vertically,avoiding placing redundantly and using shielding technology as much as possible between the interferential and sensitive circuits; strictly separating the AC and DC circuitries,the strong and weak electricity,input and output wires,among different voltage and current grade wires; shortening the length of sensitive signal wire; minishing output resistance value of signal source; using shielding twisted-pair(STP) wires,shielding layer grounding accurately; wiring reasonably in order to reduce the coupling between signal wires and welding cable.The results provide theoretical and practical references for pipe welding technology establishment and the remote pipe welding robot manufacturing.
[1] 林尚扬,等.焊接机器人及其应用[M].北京:机械工业出版社,2000. [2] Wang J. Resource sharing in distributed robotic system based on a wireless medium access protocol[J].Robotics and Autonomous Systems,1996,19(1): 33-56. [3] 宋进. 8自由度遥控机器人控制系统设计[J]. 机械设计与制造工程,2001,30(3):50-54. [4] Iocchi L,Nardi D. Hough localization for mobile robots in polygonal environments[J]. Robotics and Autonomous Systems,2002,40(11): 43-58.