柔性机械臂建模理论与控制方法研究综述

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (567 KB) HTML ( ) 输出: BibTeX \| EndNote (RIS)
引用本文:
王树新, 贠今天, 石菊荣, 刘又午. 柔性机械臂建模理论与控制方法研究综述[J]. 机器人, 2002, 24(1): 86-92.. WANG Shu-xin, YUN Jin-tian, SHI Ju-rong, LIU You-wu . A ROADMAP OF RESEARCH ON MODELING AND CONTROL STRATEGY FOR FLEXIBLE MANIPULATORS. ROBOT, 2002, 24(1): 86-92..

摘要

针对柔性机械臂进行有效和精确的建模以及对其进行有效的控制一直是国内外学者研究的重要课题．由于柔性机械臂本身所具有的高度非线性、强耦合和时变的特点，建立精确的动力学模型成为柔性臂研究的一个重点．而随着系统和控制领域理论和技术的不断发展，针对柔性机械臂的控制，也形成了许多不同的控制策略．本文从柔性机机械建模理论和控制方法两方面，对国内外学者的研究工作分别加以介绍，并对各种方法的优缺点进行分析和比较，并对今后的研究方向进行了展望．

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王树新
	贠今天
	石菊荣
	刘又午

关键词 ：柔性机械臂, 动力学建模, 控制策略

Abstract：

Modeling and controlling are very important issues for flexible manipulators. Many researchers have put much more efforts on studying the two problems. Due to the properties of high-nonlinear, tight-coupling and time-varying, dynamic modeling accurately is actual focus. Many control strategy for flexible manipulators have been formed with the development of the system and control theory. This paper introduces the very important works by the researchers in this field, and especially compares the advantages with disadvantages in the two aspects of modeling and controlling respectively. At last, this paper proposed the future direction to research on the modeling and controlling for flexible manipulators.

Key words： flexible manipulator dynamic modeling control strategy

收稿日期: 2001-04-10

TP24

作者简介: 王树新（1966- ），男，汉族．籍贯：河北省．1994年天津大学获得博士学位，现为天津大学机械学院机电控制研究室教授，博士生导师．研究领域：机械系统动力学控制与智能机器人技术．
贠今天（1970- ），现在天津大学攻读博士研究生．研究领域：机械系统动力学与控制．
石菊荣（1972- ），现在天津大学攻读博士研究生．研究领域：机械系统动力学与控制．

链接本文:

https://robot.sia.cn/CN/ 或 https://robot.sia.cn/CN/Y2002/V24/I1/86

[1] Tokhi M O.Mohamed Z.Finite difference and finite element approaches to dynamic modeling of a flexible manipulator.Proceedings of the Institution of Mechanical Engineers.Part I,Journal of systems & control Engineering,1997,211(2):145-156

[2] Fattah A,Angles J.Dynamics of two cooperating flexible-link manipulators-planar case.Transactions of the Canadian Society for Mechanical Engineering,1997,21(1):1-17

[3] Ge S S,Lee T H.Nonlinear feedback controller for a single-link flexible manipulator based finite element model.Journal of robotic Systems,1997,14(3):165-178

[4] Xia Zhijie,Menq Chia-Hsiang.Modeling and Control of flexible manipulators: Part I-Dynamic analysis and characterization.American Society of Mechanical Engineers,Applied Mechanics Division,AMD,1992,141:105-114

[5] Theodore R J,Ghosal A.Comparison of the assumed modes and finite element models for flexible multi-link manipulators.International Journal of Robotics Research,1995,14(2):91-111

[6] 张大钧.柔性多体系统动力学理论方法与实验研究:[博士学位论文].天津:天津大学,1991

[7] R L Huston,刘又午.多体系统动力学(下册).天津:天津大学出版社,1987.11

[8] 蒋铁英.柔性机械臂建模、仿真及实验研究.[博士学位论文].天津:天津大学,1996

[9] Chen Wen.Dynamic modeling of multi-link flexible robotic manipulators.Computers and Structures 2001,79(2):183-195

[10] Zhao Hongchao,Chen Degang.Exact and stable tip trajectory tracking for multi-link flexible manipulator.Proceedings of the IEEE Conference on Decision and Control,1993,2:1372-1376

[11] Theodore R J,Ghosal A.Comparison of the assumed modes and finite element models for flexible multi-link manipulators.International Journal of Robotics Research,1995,14(2):91-111

[12] Li Chang-jin,Sankar T S.Systemic methods foe efficient modeling and dynamics computation of flexible robotic manipulators.IEEE Transactions on Systems,Man and Cybernetics,1993,23(1):77-94

[13] 张铁民.柔性机械臂振动控制理论与实验研究.[博士学位论文].天津:天津大学,1996

[14] Gamarra-Rosado V O,Yuhara E A O.Dynamic modeling and simulation of a flexible robotic manipulator.Robotica,1999,17(5):523-528

[15] Dai Y Q,Loukianov A A,Uchiyama M.A Hybrid Numerical Method for Solving the Inverse Kinematics of a Class of Spatial Flexible Manipulators.Proceedings of the IEEE International Conference on Robotics and Automation,1997

[16] Feliu Jorge J,Feliu Vicente.Load Adaptive Control of Single-Link Flexible Arms Based on a New Modeling Technique.IEEE Transactions Robotics and Automation,1999,15(5):793-804

[17] Eric H K Fung,Cedric K M Lee.Variable Structure Tracking Control of a Single-Link Flexible Arm Using Time-Varing Sliding Surface.Journal of Robotic Systems,1999,16(12):715-726

[18] Bruno Siciliano.Closed-Loop Inverse Kinematics Algorithm for Constrained Flexible Manipulators under Gravity.Journal of Robotic Systems,1999,16(6):353-362

[19] Fung R-F,Chang H-C.Dynamic modeling of a non-linearly constrained flexible manipulator with a tip mass by Hamilton's Principle.Journal of Sound and Vibration,1998,216(5):751-769

[20] Eftychios G,Christoforou.The Control of Flexible-Link Robots Manipulating Large Payloads: Theory and Experiments.Journal of Robotic Systems,2000,17(5): 255-271

[21] Queiroz M S,Dawson D M,et al.Adaptive Nonlinear Boundary Control of a Flexible Link Robot Arm.IEEE Transactions on Robotics and Automation,1999,15(4):779-787

[22] 贠超.柔性机械臂的主动控制研究.[博士学位论文].天津:天津大学,1993

[23] 薛克宗,赵平.挠性机械臂三维动力建模与音挠性臂数值模拟.清华大学学报,1993,33(5):73-81

[24] 边宇枢.柔性机械臂动力学建模的一种方法.北京航空航天大学学报,1999,25(4):486-490

[25] Nguyen P K et al.Structural Flexibility of the Shuttle Remote Manipulator.Proceedings of the Guidance and Control Conference,1982:1582-1586

[26] Bernd Gebler.Feed-Forward Control Strategy for a Flexible Robot Arm with Elastic Links and Joints.IEEE,1987:923-928

[27] Khorrami Farshad,Jain Sandeep.Nonlinear control with end-point acceleration feedback for a two-link flexible manipulator: Experimental results.Journal of Robotic Systems,1993,10(4): 505-530

[28] 张铁民.柔性机械臂前馈控制的实验研究.中国机械工程,1998,9(1):39-41

[29] Lin Lih-Chang,Yeh Sy-Lin.Composite adaptive control with flexible quantity feedback for flexible-link manipulators.Journal of Robotic Systems,1996,13(5)

[30] BaiM,Zhou D H.Adaptive augmented state feedback control for an experimental planar two-link flexible manipulator.IEEE Transactions on Robotics and Automation,1998,14(6),940-950

[31] Khorrami Farshad.Adaptive nonlinear control for end-effector position tracking of multi-link manipulators with embedded active materials.Proceedings of the IEEE Conference on Decision and Control,1994,1: 103-108

[32] Lucibello P.Output Tracking for a Nonlinear Flexible Arm.ASME,Journal of Dynamic Systems,Measurement,and Control,1993,115:75-85

[33] Xia,Jack Zhijie; Menq,Chia-Hsiang.Real time estimation of elastic deformation for end-point tracking control of flexible two-link manipulators.Journal of Dynamic Systems,Measurement and Control,Transactions of the ASME,1993,115(3):385-393

[34] Kino Masaru ,Goden Tatsuhito.Reaction torque feedback based vibration control in multi-degrees of freedom motion system.IECON Proceedings,1998,3:1807-1811

[35] Ozen Figen.New nonlinear stablizing control law for flexible-link manipulators.Proceedings of the Japan/USA Symposium on Flexible-link manipulators,1996,1: 291-298

[36] Talebi H A,Khorasani K.Neural network based control schemes for flexible-link manipulators: simulations and experiments.Neural Networks,1998,11(7-8): 1337-1357

[37] Talebi H A,Khorasani K.Tip-position tracking for flexible-link manipulators using artificial neural networks: Experimental results.IEEE International Conference on Neural Networks Conference Proceedings,1998,3(4-9):2063-2068

[38] Rossi Mauro,Wang David.Issues in the design of passive controllers for flexible-link robots.International Journal of Robotics Research,1997,16(4): 577-588

[39] Ingole A R,Bandyopadhyay B.Variable structure control application for flexible manipulators.Proceedings of the IEEE Conference on Control Applications,1994,2:1311-1316

[40] Kim D H,Lee Kyo-Il.Tracking control design combined robust and adaptive scheme for flexible joint manipulators.IEEE conference on Control Applications,1996:1112-1117

[41] Li Y,Kang J.Combined robust control method for trajectory tracking of multi-link flexible manipulator.Modeling,Measurement &Control ,1998,65(2):27-37

[42] 李元春,陆佑方,唐保健.双连杆柔性臂轨迹跟踪的鲁棒控制.自动化学报,1999,25(3):330-336

[43] 王树新.多臂机器人系统的理论方法和实验研究.[博士学位论文].天津:天津大学,1993

[44] 樊晓平,徐建闽,毛宗源.受限柔性机器人基于遗传算法的自适应模糊控制.自动化学报,2000,26(1):61-67

[45] Lee J X,Vukovich G.Fuzzy control of a flexible link manipulator.Proceedings of the American Control Conference,1994,1: 568-574

[46] Yazdanpanah M J,Khorasani K.Uncertainty compensation for a flexible-link manipulator using nonlinear Hinf control.International Journal of Control,1998,69(6):753-771

[47] 申铁龙.Hinf控制理论及应用.北京:清华大学出版社

[48] Song G,Cai L.New approach to robust position/force control of flexible-joint robot manipulators.Journal of Robotic Systems,1996,13(7):429-444

[49] Bossert David,Ly Uy-Loi,et al.Experimental comparison of robust reduced-order hybrid position and force optimization techniques for a two-link flexible manipulator.IEEE Conference on Control Applications,1996:982-987

[50] Nilsson Bernt,Nygards Jonas,et al.Control of flexible mobile manipulators: positioning and vibration reduction using an eye-in-hand range camera.Control Engineering Practice,1999,7(6):741-751

[51] Sharf I.Active damping of a large flexible manipulator with a short-reach robot.Proceedings of the American Control Conference ,1995,5: 3329-3333

[52] Lin Z C,Patel R V.Cartin control of redundant flexible-joint manipulators.International Journal of Robotics and Automation,1998,13(3): 76-86

[53] 樊晓平,徐建闽,毛宗源,周其节.受限柔性机器人臂的鲁棒变结构混合位置/力控制.自动化学报.2000,26(2):176-183

[54] 刘妹琴,陈际达.一种基于RBF神经网络的机器人柔性臂的自适应控制.机器人,1999,21(7):488-493

[55] 樊晓平,徐建闽,毛宗源,周其节.受限柔性机器人臂的自适应模糊力/位置控制.机器人,1999,21(6):455-465

[56] 丁希仑,陈伟海,张启先.空间机器人柔性臂动力学模糊控制的研究.北京航空航天大学学报,1999,25(1):104-107

[57] 刘才山,王建明,阎绍泽,刘又午.滑模变结构控制在柔性机械臂中的应用.天津大学学报.1999,32(2):244-247

[58] 王大龙,陆佑方,郭九大.单连杆柔性机械臂动力学模型分析.吉林工业大学学报.1998,28(2):51-56

[59] 王大龙,陆佑方,陈塑寰,李晓光.双连杆柔性机械臂的非线性轨迹跟踪控制.吉林工业大学学报.1996,26(2):53-58

[60] 李善姬,金在权,刘龙哲.双连杆柔性机械臂的轨迹控制.延边大学学报,2000,26(1):44-47

[61] 张铁民,郭治,刘又午.柔性机械臂振动的前馈控制.机械科学与技术,1998,17(4):630-632

[62] 岳世岗,余跃庆,白师贤.重载下的柔性机械臂的动力学耦合特性.机器人,1996,18(4):224-227

[63] 王树新,蒋铁英,张铁民,阎绍泽,刘又午.柔性机械臂的动力学分析与实验研究.中国机械工程,1995,6(6):18-20

[64] Tuttle Timothy D,Seering Warren P.Experimental verification of vibration reduction in flexible spacecraft using input shaping.Journal of Guidance,Control,and Dynamics.1997,20(4): 658-664

[65] Singhose William E,Seering Warren P.Input shaping for vibration reduction with specified insensitivity to modeling errors.Proceedings of the Japan/USA Symposium on Flexible Automation ,1996,1: 307-313

[66] 刘广瑞.柔性机械臂振动主动控制理论分析.仿真与实验研究.[博士学位论文].天津:天津大学,1998