肖志权, 崔玲丽. 基于遗传算法的柔性机械臂的同时优化设计[J]. 机器人, 2004, 26(2): 170-169,175..
XIAO Zhiquan, CUI Lingli. GA Based Concurrent Optimization and Design of Flexible Manipulator System. ROBOT, 2004, 26(2): 170-169,175..
Abstract：Concurrent design method is adopted in this paper to design and integrally optimize a single-link robotic flexible manipulator system,whose mathematical model includes construction parameters,sensor parameters and controller parameters. An improved genetic algorithm(GA) is used for parameter global optimization. Simulation results demonstrate that the optimized manipulator beam is non-uniform cross-section beam. And with simple PD controller,the system shows improved performances of tip vibration suppression.
[1] Zhou P X,Wang F Y,Chen W N,et al.Optimal construction of flexible manipulators:a case study based on LQR output feedback[J] ,Mechatronics,2001,11(1):55-77. [2] 王树新,员今天,石菊荣,等.柔性机械臂建模理论与控制方法研究综述[J].机器人,2002,24(1):86-91. [3] Yamamoto K,Inoue O.New evolutionary direction operator for genetic algorithms[J].AIAA Journal,1995,33(10):1990-1993. [4] 蔡宣三.最优化与最优控制[M].北京:清华大学出版社,1982. [5] 薛定宇.反馈控制系统设计与分析--MATLAB语言应用[M].北京:清华大学出版社,2000. [6] 陆金桂,李谦,王浩,等.遗传算法原理及其工程应用[M].北京:中国矿业大学出版社,1997. [7] 周明,孙树栋.遗传算法原理及应用[M].北京:国防工业出版社,1999. [8] Mathews J H,Fink K D.数值方法[M].北京:电子工业出版社,2002.
