徐卫平, 张玉茹. 六自由度微动机构的运动分析[J]. 机器人, 1995, 17(5): 298-302,308.
引用本文: 徐卫平, 张玉茹. 六自由度微动机构的运动分析[J]. 机器人, 1995, 17(5): 298-302,308.
XU Weiping, ZHANG Yuru. KINEMATIC ANALYSIS OF A SIX-DEGREE-OF-FREEDOM MICROMOTION PARALLEL MECHANISM[J]. ROBOT, 1995, 17(5): 298-302,308.
Citation: XU Weiping, ZHANG Yuru. KINEMATIC ANALYSIS OF A SIX-DEGREE-OF-FREEDOM MICROMOTION PARALLEL MECHANISM[J]. ROBOT, 1995, 17(5): 298-302,308.

六自由度微动机构的运动分析

KINEMATIC ANALYSIS OF A SIX-DEGREE-OF-FREEDOM MICROMOTION PARALLEL MECHANISM

  • 摘要: 本文对作者设计的-种六自由度激动机构进行了位移分析,该机构由3条PP-R-S支链并联而成,为消除间隙,每条链的运动副都设计成柔性铰链.本文用坐标变换方法求出了机构的输入输出微位移关系.由于柔性铰链的运动范围受材料强度的限制,文中还建立了柔性铰链微小角位移与机构输出位移的关系,以上关系式为六自由度激动机构的结构设计提供了计算依据.

     

    Abstract: his paper developes a method for the kinematic analysis of a six-degree-of-freedom mechanismfor micromotion. The mechanism has three PP-R-S parallel chains in which all the kinematic pairs are designed as flexure kinges to avoid mechanical clearance, By means of coordinate transformation,the relation-ship between the input and the output micro-displacements of the mechanism is obtained. Because the rangeof motion of the flexure hinges is limited by material intensity, the micro-displacements of the flexure hingesare also established in relation to the output micro-displacements for the purpose of design.

     

/

返回文章
返回