韩亚丽, 祁兵, 于建铭, 宋爱国, 朱松青. 面向助力膝关节外骨骼的弹性驱动器研制及实验研究[J]. 机器人, 2014, 36(6): 668-675. DOI: 10.13973/j.cnki.robot.2014.0668
引用本文: 韩亚丽, 祁兵, 于建铭, 宋爱国, 朱松青. 面向助力膝关节外骨骼的弹性驱动器研制及实验研究[J]. 机器人, 2014, 36(6): 668-675. DOI: 10.13973/j.cnki.robot.2014.0668
HAN Yali, QI Bing, YU Jianming, SONG Aiguo, ZHU Songqing. Development and Experimental Study of Elastic Actuatorfor a Power-Assisted Knee Exoskeleton[J]. ROBOT, 2014, 36(6): 668-675. DOI: 10.13973/j.cnki.robot.2014.0668
Citation: HAN Yali, QI Bing, YU Jianming, SONG Aiguo, ZHU Songqing. Development and Experimental Study of Elastic Actuatorfor a Power-Assisted Knee Exoskeleton[J]. ROBOT, 2014, 36(6): 668-675. DOI: 10.13973/j.cnki.robot.2014.0668

面向助力膝关节外骨骼的弹性驱动器研制及实验研究

Development and Experimental Study of Elastic Actuatorfor a Power-Assisted Knee Exoskeleton

  • 摘要: 为满足下肢助力外骨骼不同行走模式下有效驱动的需求,提出了一种弹性驱动器,通过电机带动丝杠螺母串联弹簧,结合相应的刹车片,实现弹性驱动器对不同行走模式下的助力膝关节外骨骼的驱动.对弹性驱动器进行工作模式分析及刹车装置的动力学研究.为优选出合适的刹车片材料及弹簧,进行了弹性驱动器的刹车力及弹跳冲击实验.在建立的SolidWorks、ADAMS虚拟样机联合仿真平台上对弹性驱动器驱动的膝关节外骨骼进行运动仿真,考察弹簧刚度及等效质量对弹性驱动器工作性能的影响,为下肢助力机器人弹性驱动器的设计提供理论依据.

     

    Abstract: An elastic actuator is proposed for meeting the effective drive demands of a lower limbs power-assisted exoskeleton under different walking patterns. The proposed actuator can drive a power-assisted knee exoskeleton to achieve different kinds of motion through driving the screw nut by a motor to connect a spring in series and combining with the corresponding brake pads. The motion mode of the elastic actuator is analyzed, and the dynamics of brake mechanism is studied. Some braking force and bounce impact experiments are implemented for selecting suitable brake pad material and spring. The effects of spring stiffness and equivalent mass on the elastic actuator properties are studied based on a virtual prototype co-simulation platform with SolidWorks and ADAMS. The simulation results provide theoretical basis for designing the elastic actuator of lower limb power-assisted robot.

     

/

返回文章
返回