Abstract:A bridge-type compliant mechanism with direct coupling for the intermediate drive mechanism of inchworm actuator is developed and its simplified model is also established.The stiffness equations are deduced according to Cas-tigliano's theorem and the natural frequency is derived with the compliant mechanism simplified as one DOF spring-mass system.The experimental tests of stiffness and natural frequency are carried out and the results are compared with the results of finite element analysis(FEA) and analytical method.The results show that the errors of the analytical model of stiffness and natural frequency are 5.5% and 14.1%,and the corresponding errors of FEA are 7.7% and 10.1% respectively.The experimental results show the validity of the analytical model FEA.In order to facilitate parameter optimum design in the initial design stage,FEA is used to study the influence of geometrical dimensions of the compliant mechanism on its static and dynamic performance.Then a simple optimum design procedure by changing geometrical dimensions to optimize static and dynamic performance of the compliant mechanism is presented.
宗光华,裴旭,于靖军,等.一种新型柔性商线导向机构及其运动精度分析[J].光学精密工程,2008,16(4):630-635.Zong Guanghua,Pei Xu,Yu Jingjun,et al.Novel compliant linear guiding mechanism and analysis of kinetic precision[J].Optics and Precision Engineering,2008,16(4):630-635.
[6]
Ryu J W.6-axis ultraprecision positioning mechanism design and positioning eontrol[D].Korea:KAIST,1997.
[9]
Schotborgh W O,Kokkeler F G M,Tragter H,et al.Dimensionless design graphs for flexure elements and a comparison between three flexure elements[J].Precision Engineering,2005,29(1):41-47.
[2]
于靖军,剧强,毕树尘,等.基于动力学性能的全柔性机构优化设计[J].机械工程学报,2003,39(8):32-36.Yu Jingjun,Zhou Qiang,Bi Shusheng,et al.Optimal design of a fully compliant mechanism based on its dynamic characteristics[J].Chinese Journal of Mechanical Engineering,2003,39(8):32-36.
[4]
Ma H W,Yao S M,Wang L Q,et al.Analysis of the displacement amplification ratio of bridge-type flexure hinge[J].Sensors and Actuators,A:Physical,2006,132(2):730-736.
[10]
Yong Y K,Lu T F,Handley D C.Review of circular flexure hinge design equations and derivation of empirical formulations[J].Precision Engineering,2008,32(2):63-70.
[7]
Kim J H,Kim S H,Kwak Y K.Development and optimization of 3-D bridge-type hinge mechanisms[J].Sensors and Actuators,A:Physical,2004,116(3):530-538.
[5]
Lobontiu N,Garcia E.Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms[J].Computers and Structures,2003,81(32):2797-2810.
[8]
Lobontiu N.Compliant mechanisms:Design of flexure hinges[M].USA:CRC Press,2003.
[3]
孙立宁,马立,荣伟彬,等.一种纳米级二维微定位工作台的设计与分析[J].光学精密工程,2006,14(3):406-411.Sun Lining,Ma Li,Rong Weibin,et al.Design and analysis on a 2-DOF nanopositioning stage[J].Optics and Precision Engineering,2006,14(3):406-411.